6 Steps to Install a Jeep Wrangler Spare Tire Light

If you’re looking for an easy way to light up the back of your Jeep Wrangler, then you might want to consider adding a spare tire light. This nifty little piece of equipment can make it much easier to see the back of your Jeep while you’re driving at night. It’s a relatively simple installation and won’t require much time or money to complete. In this blog, we’ll walk you through the steps required to get your spare tire light up and running.

1. Remove the original spare tire
2. Open the rear cargo door
3. Unplug the factory 3rd brake light
4. Set the new spare tire brake light
5. Plug the factory 3rd brake light
6. Reinstall back

1. Remove the original spare tire

The first thing you’ll need to do is purchase a Jeep wrangler spare tire light. You can find these at SUPAREE. Make sure that you’re getting the right one for your vehicle model, as there are several different sizes and types available. Once you have the light, you’ll need to remove the spare tire from your Jeep. This process will vary depending on the model, but generally, you’ll need to remove the spare tire mounting bracket and then remove the spare tire itself.

2.Open the rear cargo door

To remove the factory 3rd brake light from the rear cargo door of your vehicle, you will need to open the door and locate the four screws that are holding the light in place. Using a T20 Torx driver, unscrew the four screws and carefully remove the factory 3rd brake light. Take care not to lose any of the screws in the process.

3.Unplug the factory 3rd brake light

4.Set the new spare tire brake light

Set the spare tire brake light on the studs of the spare tire mount. Make sure that the wire is in the upper position to ensure you have enough length.

5.Plug the factory 3rd brake light

Plug the factory 3rd brake light in to the brake light ring harness,Plug the brake light ring into the factory harness

6. Reinstall back

Reinstall back the plastic shell of the high brake light and the spare tire. The installation is complete.

In general, it is an easy task to install a Jeep Wrangler Spare Tire Light, especially the SUPAREE. It supports turning and is plug-and-play with multi-circle illumination, making it not only easy to install but also better protecting your vehicle and enhancing your safety!